How to Draw-Stroke Paddle a Canoe
Things You'll Need
- Canoe Gear Bags
- Canoe Kneeling Pads
- Canoe Paddles
- Canoe Yokes
- Canoes
- Life Vests
Instructions
-
-
1
Position yourself in a well-braced sitting or kneeling position.
-
2
Hold the paddle with your inside hand on its top and your water-side hand 2 feet down the shaft.
-
3
Reach out over the edge of the canoe as far as you can without losing your balance. To move the canoe sideways, reach on the side that is the same as the direction you wish to go. For quick turns, reach in the direction you want your end to turn.
-
4
Insert the blade of the paddle into the water. Your lower arm should be fully extended and your top arm should be bent.
-
5
Straighten your top arm and bend your lower arm, drawing the blade of the paddle toward you through the water.
-
6
Pull the paddle inward until it is within 6 inches of the canoe. Imagine yourself pushing the water under the canoe.
-
7
Slice your paddle backward and up to remove it from the water, then reach out for another drawstroke.
-
1
sports