How to Test a Tight Point Broadhead

Broadhead tips have two or more cutting edges, and are classified as either fixed or mechanical. Tight Point, owned by Trophy Taker as of 2011, produces a variety of broadhead arrowheads such as the Shuttle T-Lock and Terminal T-Lock. These broadheads have three cutting edges, razor-sharp chisel tips and lock to the base ferrule. Tight Point broadheads are engineered to be aerodynamic, flight-silent and deliver powerful, bone-splintering impacts. All broadheads, including Tight Point broadheads, need to be tested in order to get an idea of how they will affect game when out in the field, and how well they will hold up over multiple impacts.

Things You'll Need

  • 3/4-inch plywood
  • Backstop
Show More

Instructions

    • 1

      Set up a 3/4-inch piece of plywood as a target. Set an adequate backstop, such as a bale of hay, about 10 feet behind the target.

    • 2

      Stand 15 yards away from the target. Fire the arrow at the target.

    • 3

      Measure the arrow penetration from behind the target. Note and measure the size of hole that the broadhead makes in the target.

    • 4

      Repeat the test 10 times using the same arrow. Measure the penetration and wound size after every test shot. Typically, the broadhead will not penetrate as much and will become dull over numerous shots, resulting in less penetration or no penetration. The number of shots it takes for the broadhead's penetration to deteriorate is an indication of how much use the broadhead can handle on game animals.

    • 5

      Inspect the broadhead. Look for any burring, tip-dulling, dings or dull edges. Sharpen the broadhead and repeat the test. If the broadhead still penetrates the target after sharpening, keep test firing until the broadhead is no longer penetrating. Keep a count of every shot you make with the broadhead during the test so that you know how many times you can fire it effectively.