How to Tell if Ponds Are Safe to Skate On
Things You'll Need
- Drill with at least a 9-inch-long bit
- Measuring rod marked from 1 to 12 inches
Instructions
-
-
1
Wait at least seven days in a row of weather below 25 degrees Fahrenheit before considering going to a pond. Windy days make for poor ice conditions, so the seven days of low temperatures is not a guarantee of safe ice.
-
2
Drill through the ice every 10 feet at various places around the pond to measure the thickness with the rod. Start at the edge where you enter the pond and carefully work toward the center and then along the edges to the other side. Look for ice that is clear and chips. Ice that is either dark or cloudy and flakes instead of chips is dangerous, regardless of the thickness.
-
3
Avoid ponds where the ice is not at least 6 inches deep across the length and width of the pond, and do not consider skating there. Two ponds, even next door to each other, can have different ice thicknesses, so each one must be measured separately.
-
4
Walk the entire circumference of the pond and note any intake or outflow pipes. The ice will be much thinner in those areas and must be avoided.
-
5
One warm, sunny or windy day can quickly change the circumstances. Redrill and retest the ice if the temperature has risen above 32 degrees at any time or if there has been several days of bright sun or wind.
-
1
sports