How do I Build a Rink Over a Swimming Pool?
Things You'll Need
- Swimming pool
- Vinyl pool blanket or liner
- Weighted water bags, sand bags
Instructions
-
-
1
Winterize all pipes and pool equipment the same way you would every autumn. There is no need to do anything differently. Then drop the level of the pool's water to 18 to 20 inches below the coping (molding edge) level.
-
2
Lay the vinyl pool blanket over the top of the pool, ensuring that it overlaps the pool's edges by about 3 feet. The blanket should be floating on the water and draped on the surrounding ground or deck.
-
3
Place the water or sand bags around the pool's perimeter on top of the blanket. This will hold the blanket and protect the surrounding coping, tiles and deck from damage.
-
4
Check to make sure that the vinyl blanket is still in contact with the water's surface and has not been pulled up during the process. The blanket has to touch the water.
-
5
Add 4 inches of water on top of the blanket when the temperature is cold enough to form ice. Try to do this when the temperature has been steady and is not likely to go above freezing for some time.
-
1
sports