EAA 45 ACP Problems

The EAA .45 ACP semi-automatic pistol is a serious piece of weaponry, but that doesn't mean it can't run into problems. When it comes to firearms, you don't want to risk using something that's operating at less than 100 percent. If you're running in to any issues with your EEA pistol, you should identify and fix the problem before you use it again.

  1. Maintenance

    • Performance issues can arise if you do not properly take care of your sidearm. The materials to properly clean and maintain your firearm can be found at most gun shops. The inside of the barrel and the chambers should be scrubbed clean with a bore brush and some powder solvent to remove any residue. Make sure that no powder residue has accumulated inside the firearm, and clean the outside of the gun with a rust prevention agent. Preferably, the inside of the gun should be cleaned after each use, and the outside of the gun should be cleaned whenever it gets dirty or before prolonged storage to avoid rusting. A poorly maintained gun can malfunction or misfire.

    Security Lock issues

    • The .45 ACP comes with a security lock to provide extra protection from accidental or unauthorized use. While you should definitely use the security lock, one drawback of any lock is that you can sometimes lock yourself out. To avoid this, make sure that you are using the security lock properly. Before attaching the lock, you should attach the block. This can be done by sliding the block on to the trigger or, alternatively, by placing the gun back into its plastic case. You should make sure that the magazine is removed and the gun has its safety on before doing this. The lock is then inserted through the block and locked. For security purposes, you should keep the key in a different location from the lock. However, be sure not to lose the key.

    Obstruction

    • It's easy to overlook a barrel obstruction. But a barrel obstruction can cause misfiring, resulting in serious injury or even death. Before firing your .45 ACP, make sure that the barrel is completely unobstructed. Check for obstructions by pulling back the slide and looking down the barrel from the chamber end. Never look down the muzzle end. The obstruction could be anything from oil build-up to a trapped shell. Whatever the obstruction is, the procedure is the same; do not fire the gun. Rather, unload and disassemble the firearm, and remove the obstruction.

    Ammunition

    • Using incompatible ammunition with the .45 ACP can cause potentially dangerous problems with firing. The EAA .45 ACP takes .45 rounds only. In addition, you should never use high velocity or +P (overpressure) ammunition with the .45 ACP, as it is not designed for this type of round. You should also avoid using old ammunition or hand-loaded rounds. Avoid using anything but professionally manufactured, fresh rounds for maximum performance and safety.