How to Change Kel Tec P32 Grips

The Kel-Tec P-32 is a pistol made by Kel-Tec CNC Industries Inc., based out of Cocoa, Florida. The .32-caliber pistol, which was designed by Swedish firearms designer George Kellgren, is popular for concealed carry in the United States. The clip holds seven rounds, with one in the chamber. The Kel-Tec has a barrel length of 2.68 inches and the trigger pull weight is between 5 and 6 pounds. If the grips ever becomes worn, you can replace them with new ones.

Things You'll Need

  • Small screwdriver
  • Replacement grips
Show More

Instructions

    • 1

      Press in on the clip release and eject the clip from the pistol.

    • 2

      Check to make sure the safety is on and that there is not a round in the pistol's chamber.

    • 3

      Insert a screwdriver into the small screw on the left-hand side of the handle that holds the grips in place. Turn the screw until it comes out. Once it is out, remove the old grips.

    • 4

      Position the new grips on the handle and insert the long screw back through the handle. Screw it in tight with your screwdriver.

    • 5

      Replace your clip and make sure the pistol remains with the safety set if you are not using the gun.