Air Driver 1100 Directions

Keeping your bike tires pumped is essential to riding efficiently and safely. The Air Driver 1100 bike pump from Schwinn is compatible with both Presta and Schrader tire valves.

Things You'll Need

  • Bike tire
Show More

Instructions

    • 1

      Turn the wheel that is holding the tire you are pumping up so that the valve is easily accessible. Remove the cap that is over the valve. If your tire has a Presta valve, open it by unscrewing the head.

    • 2

      Put the Air Driver's nozzle over the valve and lock it into place by pulling the small lever upward. If your tire has a Presta valve, fit the adapter over the nozzle before completing this step.

    • 3

      Take note of the PSI of your tire, listed on the side of the tire. Stand on the foot plates of the Air Driver and pump the tire until the gauge reaches the correct PSI.

    • 4

      Return the pump's lever to its original unlocked position and remove the nozzle from the valve. Close the Presta valve, if necessary. Replace the cap over the valve.