How Do You Set the Clock on a Panoram V12

The Panoram V12 is a small digital device that you attach to your bicycle to record a number of metrics about your ride, including trip time, trip distance, average speed and more. The Panoram V12 comes with a robust feature set, but with only three buttons on the face of the device, it can be a little confusing to set up the V12. The V12 does allow you to change the current time on the device, and all you have to do is figure out which combination of buttons accesses the clock feature.

Instructions

    • 1

      Let the device sit for 20 seconds to allow it to return to the "Normal Data Setting" screen. Press and hold the "Adjust" button, which is the located on the left side of the device, and the "Set" button, which is located on the right side, for four seconds until a four-digit number appears on the screen.

    • 2

      Press and hold the "Mode" button, which is located just under the LCD, for two seconds. The clock will appear on the LCD. Press the "Adjust" button to scroll through the "24 hour" setting, "AM" and "PM."

    • 3

      Press the "Set" button to make the numbers on the clock start to blink. The hours digit will be blinking first.

    • 4

      Press the "Adjust" button to scroll through the possible numbers for the hour setting. This setting will be between zero and 12 for 12 hour clocks, and zero and 23 for 24 hour clocks. Press the "Set" button once this number is set to your liking. The first digit of the minutes section of the clock will start blinking.

    • 5

      Press the "Adjust" button to change the first digit of the minutes section. This digit can be between zero and five. Press the "Set" button to move over to the second digit, and use the "Adjust" button to set this as well.

    • 6

      Press and hold the "Set" button for two seconds to exit the clock screen and go back to the standard Panoram V12 screen.