How Do I Fix My Polaris Pro X 700?

The Pro X 700 is a snowmobile manufactured by Polaris that is great for having hours of fun traversing at high speeds over snowy fields and mounds. However, a poorly running Polaris or one that will not run at all can end your trip before it even gets off the ground. Many problems on the Polaris, especially in terms of not starting up or running roughly are attributed to common issues that can be addressed by the owner, and require only a limited amount of mechanical knowledge.

Things You'll Need

  • Gasoline
  • Lubricating grease
  • Ratchet wrench
  • Spark plug socket
  • Spark plug (optional)
  • Torque wrench
  • Fuel filter (optional)
Show More

Instructions

    • 1

      Check the Polaris gas tank to make sure there is fuel in it.If there is not, add fresh fuel.

    • 2

      Check the fuel valve on the dash to make sure it is flipped to the on position.

    • 3

      Lubricate the throttle and choke cables if either seem to be stuck or will not operate properly. A small amount of grease will lubricate both

    • 4

      Remove the spark plug wire on the Polaris and take out the old plug with a spark plug wrench. Insert the new spark plug and hand tighten it. Tighten it using a torque wrench to the appropriate torque as specified in the owner's manual.

    • 5

      Inspect the in-tank fuel filter. If it appears dirty or gas will not flow through it, remove it from the line with a pair of pliers and install a new one.