How to Check Stators in Ski-Doo

The stator on the Ski-Doo is a stationary part of the engine, located near the spark plugs, that help create a spark in conjunction with the spark plugs that causes combustion in the gas engine. If your Ski-Doo will not start and the battery and spark plugs all check out OK, there's a chance the stator could be bad. The stator can be tested with a digital multimeter.

Things You'll Need

  • Ski-Doo manual
  • Wrench
  • Multimeter
Show More

Instructions

    • 1

      Determine the stator resistance range for your model Ski-Doo. This information is in your owner's manual.

    • 2

      Remove the engine cover of your Ski-Doo with a wrench. Also remove the negative battery cable with the wrench.

    • 3

      Locate the stator on your Ski-Doo. It sits on top of the engine block, near the spark plug.

    • 4

      Power up the multimeter and turn the dial to the resistance setting. Touch the red meter lead to the positive stator wire, which may be white, blue or green. Place the tip of the negative meter lead to the negative, or black, stator wire.

    • 5

      Examine the resistance reading on the meter. If the resistance is in between the resistance range for your Ski-Doo, the stator is good.

    • 6

      Reattach the negative battery cable with the wrench.