How to Pull a Water Skier

One of the most important factors in a water skier's experience is the performance of the boat driver. There are several things a boat driver you can do to make the skier's ride as enjoyable, and as safe, as possible.

Instructions

    • 1

      Start the engine only after the water skier is in the water and clear of the propeller. Put the boat in and out of neutral, slowly moving away from the skier and tightening the tow rope.

    • 2

      Wait for the skier's signal to start before you begin pulling him. He should be holding the towline securely and have his skis in the proper position for take-off. Begin accelerating slowly, increasing the throttle smoothly to get the skier up. Generally, if the skier is getting up on one ski, you want to give the boat more gas than if he's skiing on two.

    • 3

      Once the water skier is out of the water, maintain her preferred cruising speed. A beginner should ski at about 20 miles per hour.

    • 4

      Make a turn in the shape of a skeleton keyhole. Begin with a slight turn to the left, then back to the right, forming a circle as you turn. The boat will slow during the turn, so compensate by giving it more gas. Once the circle is completed, follow your boat's original path. Look for bubbles as a guide to keep you on the previous path and ensure the smoothest and most wave-free ride.

    • 5

      Avoid making sharp turns, particularly when the skier is outside of the boat's wake. If you have to make a sharp turn to avoid an obstacle, reduce the throttle.

    • 6

      If the skier falls, circle back to her as quickly as possible. Always pass the skier on the driver's side of the ski boat to ensure you can see the skier at all times. Never back up your boat to a skier. Get close to her, keeping her on your right, and turn off the engine.