How to Build Your Own Golf Cage

A golf cage, like a batting cage used for baseball, may be used for golfers to practice their golf swings without having to lose or retrieve balls. Though building your own golf cage may take a bit of money, in the long run it will save you money you would have otherwise spent at a driving range. Imagine hitting the driving range everyday by simply walking out to your backyard and driving a few balls into your handmade golf cage.

Things You'll Need

  • Two 2-inch by 4-inch boards, 10 feet in length
  • Two 2-inch by 4-inch boards, 8 feet in length
  • Five 2-inch by 4-inch boards, 6 feet in length
  • Carpenter's square tool
  • Protractor
  • Pencil
  • Power saw
  • Gloves
  • Safety goggles
  • Nails or screws
  • Hammer or screw gun
  • Staple nails
  • Golf netting measuring 12 feet by 10 feet 
Show More

Instructions

    • 1

      Cut the 2-inch by 4-inch pieces to length, as indicated in Things You Need. Use the protractor, pencil and carpenter's square tool to draw 45-degree angles on each end of the two 10-foot long pieces. You want each angle to slope in a different direction; you will create a trapezoid rather than a rhombus.

    • 2

      Cut the angles you drew in the previous step, and wear your safety goggles and gloves. Creating the angles will allow the 10-foot pieces to create the hypotenuse of the two triangles you are about to construct.  

    • 3

      Create a 90-degree angle with one of the 8-foot pieces and one of the 6-foot pieces, nail or screw the pieces together and repeat with another 6-foot piece and the remaining 8-foot piece. With the two 90-degree angles you just constructed lying flat, you should be able to easily fit your angled 10-foot pieces between the opposite ends of the angle pieces to form a right triangle. Nail or screw the 10-foot pieces into place.  

    • 4

      Ask a friend to help you with this next step, as you will need someone to hold the pieces into place as you assemble them. Essentially in this step you will create a box or prism shape by connecting the two right triangles using the remaining 6-foot pieces. The 6-foot pieces will attach to one angle on one right triangle and the other end of the 6-foot pieces will attach to the matching angle on the other right triangle.

    • 5

      Cut two pieces from the golf netting, one piece measuring 10 feet by 6 feet, another measuring 8 feet by 6 feet. Take the 8-foot by 6-foot piece and cut it in half from one corner to the opposite corner to create two equal-sized right triangles. Attach the netting to the frame using the "u"-shaped staple nails, attach along the sloped side and the two triangle-shaped ends, and leave the bottom that will touch the ground open, as well as the 8-foot by 6-foot side in which you will stand to drive the balls.