How to Make a Wiffle Ball Bat
Things You'll Need
- 1 1/4- to 1 3/4-inch wood pole or broom handle
- Circular saw or hand saw
- Sandpaper
- Textured tape or cotton rope
- Permanent marker
Instructions
-
-
1
Cut the stick or pole to size with a saw. According to professional baseball bat size standards set in 1859, bats may be no longer than 42 inches with a maximum diameter of 2 3/4 inches. A junior bat by Wiffle for small children is 24 inches long with a 1 1/4-inch diameter. Wiffle's average bat size is 31 inches long with a 1 1/4-inch diameter.
-
2
Gently sand the bottom 12 inches of the wood pole to prevent slivers.
-
3
Sand along the top of the pole to soften and round the edges like commercially made bats.
-
4
Make a handle by wrapping a 6- to 8-inch portion of the pole where you will grip it. Textured tape, such as medical or cloth tape, or tightly wrapped rope work well. The tape may loosen after many swings with sweaty hands, so replace it when necessary.
-
5
Use your team crest as the logo for your homemade bat. Draw a logo or trademark on the barrel of the bat. Historically, the trademark was branded into wood bats a quarter-turn from the "grain." If the batter kept the trademark up, the grain faced the pitcher, allowing the bat to make contact with the ball at the bat's most ideal spot. For tradition's sake, give your bat a logo, such as your initials or the date of the bat's first debut game boldly circled.
-
1
sports