How to Test the Invicta 8926 Pro Diver's Watch

Diver's watches are durable pieces of equipmentand are more than a mere chronometer; they help athletes keep track of the amount of air remaining in their oxygen tanks. To do this, diver's watches feature a high water resistance, screw-down components, clear high-contrast indicators and a uni-directional bezel. The 8926 Diver's Pro by Invicta has a stainless steel casing, luminous markers, safety clasp and a depth rating of 656 feet. (i.e., 200 meters) While you should purchase your watch from a brand you trust to make quality timepieces, you should test your watch prior to every dive to ensure it is functioning correctly. This is especially important if you wear your watch daily.

Things You'll Need

  • Sink
  • Running water
  • Suitable diving area
  • Pen light
  • Ice
Show More

Instructions

  1. After Purchase

    • 1

      Inspect the watch for visible signs of damage to the casing or mechanics, such as cracks, dings or a slow chronometer.

    • 2

      Submerge the watch in a bucket or sink-full of water. Shake the watch to release air caught in the wrist strap. Wait to see if additional air is released, this may indicate a crack in the casing.

    • 3

      Fill the sink or bucket with ice. Submerge the watch and check for visibility of markers; the ice will increase standard water distortion making it more difficult to see.

    • 4

      Shine a light on the watch face to simulate solar glare. Check the face for visibility under these conditions.

    • 5

      View the watch in a dimly lit room, such as a closet, to test the visibility under low-light conditions.

    • 6

      Set the bezel. Tap or brush the watch against your pant leg to ensure it does not shift easily. Attempt to rotate the bezel in both directions to make sure it only turns in one direction.

    • 7

      Test the watch against a trusted watch over a 1 month period for accuracy. Return the watch to the retailer for servicing or replacement if it does not keep time accurately.

    Pre-dive

    • 8

      Inspect the casing for visible damage.

    • 9

      Check the pins and wrist strap for wear and tear that may cause a malfunction.

    • 10

      Embark on a test dive to ensure that all dive equipment, including your watch, are functioning as expected.