How to Make a Rainbow Snowboard Box

A snowboard box is a type of ramp, generally constructed from wood or metal, used by snowboarders to perform various moves and tricks. These boxes can range anywhere from 8 to 16 feet long, depending on your personal preference. Instead of putting your money into purchasing an expensive store-bought snowboard box, design your own box and save your money for a lift pass during the winter. One place to look for cheap materials is at ice skating rinks. Many times these rinks throw away their old materials which are ideal for turning into snowboard boxes. Purchase some spray paint supplies to decorate your finished product in a rainbow design and start practicing your boarding moves.

Things You'll Need

  • 2-by-4 pressure treated pieces of wood, 10 feet long, 2
  • 2-by-4 pressure treated pieces of wood, 2 feet long, 15
  • Wood screws
  • 10-foot sheets of plywood, 2
  • 10-by-2-foot sheet of Plexiglas
  • Spray paint
Show More

Instructions

    • 1

      Vertically attach the 2-foot-long 2-by-4 wood pieces, evenly spaced, along the outer left and right-hand sides of the 10-foot-long 2-by-4. Attach each 2-by-4 securely in place with wood screws.

    • 2

      Place another 2-by-4, horizontally as an added brace where each 2-by-4 leg and the 10-foot piece of board meet.

    • 3

      Screw the two 10-foot sheets of plywood onto each side.

    • 4

      Screw the Plexiglas over the top of the 10-foot long board.

    • 5

      Spray paint your finished snowboard box in a rainbow pattern, as you desire.