How to Use Ski Blades

While downhill skiers perform fluid turns and maneuvers, ski bladers prefer high-impact tricks that involve flips and spins. According to the website Skiing History, some of the earliest ski blades measured just 32 inches. The compact design of the ski blade aids in aerial tricks and freestyle maneuvers. Unlike full sized skis, the ski blade does not require the use of fiberglass poles for support. The shorter blade helps to decrease the overall weight of the skis.

Instructions

    • 1

      Insert the toe of your ski boots into the bindings of the ski blades. Apply downward pressure to lock your boots in place. Stand at the top of the ski slope with your ski blades in a horizontal position.

    • 2

      Rotate your ski blades while leaning forward to point the elevated tips down the mountain slope. Bend your knees to balance your skiing stance. Apply pressure to the inside edge of your right ski to turn toward the left.

    • 3

      Lean back as your ski blades traverse across the slope. Apply pressure to the inside edge of your left ski while rotating your shoulders to turn in the opposing direction. Repeat this technique to link your turns.

    • 4

      Navigate your ski blades toward a small inclined ramp. Bend your knees as you begin to ski up the ramp face. Extend your legs and jump vertically as you reach the apex of the snow ramp.

    • 5

      Raise your knees to maximize the air time of your ski blade jump. Extend your dominant hand downward and grab the outside edge of the ski blade. Bend your knees to absorb the impact as your skis make contact with the slope.