How to Remove Billiard Table Rail Cushion Rubber

The rail cushions, or rail rubbers, on your billiard table are made of long-lasting material that should not need replacing for years. However, if they have become worn, they may affect your billiards game. Or you may be refurbishing an older table and need to remove the cushions to replace them with new ones. You'll find this an easy task to do.

Things You'll Need

  • Phillips screwdriver
  • Staple remover
  • Pliers
  • Craft knife
  • Sandpaper
Show More

Instructions

    • 1

      Unscrew the rails from the billiard table and carefully remove them. Remove the staples from the undersides of the rails using the staple remover and pliers, being careful not to damage the felt. Fold the felt up and out of the way of the cushion.

    • 2

      Wedge the craft knife between the cushion and rail where the cushion is glued on. Gently work the cushion loose by pulling the cushion and working the craft knife along the gap between the cushion and rail.

    • 3

      If you're planning to replace the cushion, sand the gummy buildup off the rail to prepare the surface for the new cushion.