How to Move a Brunswick Pool Table
Things You'll Need
- Standard tools Moving dolly Pool table dolly
Instructions
-
-
1
Follow the instructions provided with your table, and carefully dissemble your table piece by piece. Mark each piece with a magic marker (on inside areas, where it will not show later) as you go along to make sure the table goes back together in the same way it came apart.
-
2
Remove the rails first, followed by the pockets (which are attached to the rails) and the screws holding the slate to the cabinet. Remove the slate from the table---remembering to hold it and transport it vertically on edge. Do not lay the slate flay until it is placed back on the table.
-
3
Using a dolly, move all pieces to the new location, assemble the table and level it according to manufacturer's instructions.
-
4
Or you can rent a pool table dolly. If you are lucky enough to be moving your table a short in-room distance or are blessed with large doorways for your move---a pool table dolly might be perfect for you. These large, flat dollies lift your table in the same manner as a car jack--rolled under the table and jacked up on a balanced plate that does not damage the slate. From there, the table can be rolled to its new location or up a ramp and into a moving truck. See Resources.
-
5
Hire professionals. A pool table is more than just another piece of heavy furniture, and improper moving techniques can easily damage the slate and balance of your table---potentially voiding your Brunswick Limited Lifetime Warranty. A Brunswick authorized dealer can help you find a professional piano mover who can do the entire job for around $200.
-
1
sports