How to Remove a Sugar Sand Jet Boat Ride Plate

Sugar Sand is a company that manufactures high-powered jet boats. With the engines in the back of the boat, it is natural for the bow to lift upwards as the accelerator is engaged. This natural tendency places stress on the rear hull area. Sugar Sand boats, as well as many personal water craft however, have what is known a skid plate, or a drive plate. The plate also assists in controlling the turning of the craft at all speeds.

Instructions

    • 1

      Access the bottom of the Sugar Sand boat.

    • 2

      Turn the heat gun on and heat the hull area around the screws to loosn.

    • 3

      Remove the ride plate retaining screws with an impact wrench. Gently lift the ride plate off the hull and set aside.