How to Remove the Rear Sight on a Buckmark Challenger

The Buckmark Challenger .22-caliber semi-automatic pistol features both rear and front sights. Some marksmen find the rear sight irritating and want to remove it. The rear sights are permanently mounted on a steel sight bar. To remove the rear sights, it's necessary to remove the steel sight bar from the gun. With the sight bar removed, it's relatively straightforward to remove the sight.

Things You'll Need

  • Small flat head screw driver
Show More

Instructions

    • 1

      Locate the sight bar mounting screws; one is found directly behind the sights and the other is found a few inches in front of the sights on top of the barrel.

    • 2

      Remove the screws with a small flat head screw driver. Pull the sight bar with the rear sights attached off the gun.

    • 3

      Slide the sight off the steel bar by pushing it forward until it comes off the bar.

    • 4

      Replace the sight bar on the gun and turn in the screws until flush.