How to Disconnect the EZ-GO Backup Buzzer

EZ-GO is a company whose name is associated with golf carts by many people. EZ-GO produces several models of carts for use on golf courses. However, the usefulness and application of the carts also extends into home and farm use. Equipped with a gasoline engine or electric motor, EZ-GO carts have features that include an audible back up buzzer. Some owners decide to disconnect the buzzer when using the carts on their own property.

Things You'll Need

  • EZ-GO wiring diagram
  • Gloves
  • Pliers
Show More

Instructions

    • 1

      Turn off the EZ-GO golf cart, place the gear selector in neutral and set the parking brake. Remove the key from the ignition before starting work.

    • 2

      Access the battery compartment of the EZ-GO golf cart. Remove the seat, if necessary, to obtain a clear view of the wires that run from the battery.

    • 3

      Put on gloves to protect your hands, while working on the golf cart. Trace the wires from the battery to starter. Refer to an EZ-GO wiring diagram to help trace the wires to the correct location. Locate the backup buzzer; on some models it is near the starter switch.

    • 4

      Locate the backup buzzer as well as the wire connection running to the contact on or near the starter. Pull the buzzer wire free from the contact. Use a pair of pliers if necessary, to help in disconnecting the buzzer wire.

    • 5

      Replace the seat over the battery compartment. Follow the manufacturers recommendations for starting and placing the cart in reverse to test that the buzzer has been disconnected.