T-Max Winch Instructions

T-Max winches are made to use with ATVs or four-wheel drive vehicles. The winch attaches to the front of the vehicle and has a wire cable with a hook that attaches to the load to be moved. The winch uses the vehicles battery for the power and has switch controls for the retrieve on the spool. The winch also is used to help haul the vehicles out of situations when the rig is stuck or needs assistance when scaling steep grades.

Things You'll Need

  • Wheel chocks (optional)
Show More

Instructions

    • 1

      Set the ATV or 4x4's emergency-parking brake or place wheel chocks under the front wheels. Push the cable release lever on the winch - on the side of the spool - and pull out the desired length of cable. Attach the cable hook to the solid point to use as leverage or to the article to be pulled up.

    • 2

      Push the clutch shifter on the winch to the "Out" position. Take out any slack from the cable by pulling it toward the spool. Push the shifter to "In" and engage the clutch. Turn the winch power to "On".

    • 3

      Double check all connections before beginning the retrieve. Grip the hand held control box and press the "In" button to begin the retrieve. Press "Stop" or "Out" to stop the cable or to turn the spool in the out position.

    • 4

      Bring the vehicle or gear to the winch and turn it off. Remove the cable from the article and turn the reel back on and bring in the excess cable.