Rebar Portable Shelter Projects

Rebar is available in small diameter sizes that can be cut or shaped for bracing in portable shelters. The shelters can then be placed in suitable locations for emergency storm shelters or affordable shelter on hiking or camping expeditions. Hunters and photographers can use rebar to create hiding spaces to allow closer access to birds or other wildlife.

  1. Geodesic Construction

    • Geodesic domes can be used as emergency shelters or command installations.

      A geodesic design is thought to provide the most load support for the least amount of construction material, making it an ideal shelter for emergency use. Each section of a geodesic dome is built by forming a triangle out of three sections of rebar. The sections are then joined together into diamond-shaped panels, which are connected to form the complete shelter. Rebar is a good material for building a geodesic dome. Since the dome is constructed of many interlocking pieces of the same length, rebar can be cut and stacked into a ready bundle. Sections can be attached using wire or locking connectors. Depending on the size of your design, smaller panels can be permanently assembled, then transported to the necessary location to put the panels together.

    Nature Blinds

    • A portable screen helps you get closer to the action.

      Rebar nature blinds are little more than a set of posts covered with a netting or canvas. The covering may be painted to make it appear more natural, or simply left in the same location for many days to allow the native life to become accustomed. Rebar nature blinds can even be installed in shallow water, allowing nature lovers extreme access in swampy or wet terrain without alarming the animals they are checking out.

    Teepee Shelters

    • Teepees are simple and lightweight.

      More outdoor enthusiasts are likely to reach a consensus opinion on the basic design of a teepee before agreeing on the way the name is spelled. The design consists of a rough circle of straight bars held together to form a pyramid shape. This skeleton of bars is then covered with fabric or canvas, and the flap where the ends of the material meet becomes a simple door. The spelling of the name, though, varies widely, including tipi, tepee and tee-pee. For a highly portable shelter, this design has the advantage of using the fewest number of parts, reducing the weight that must be transported.

    Outdoor Canopy Ideas

    • Rebar is easier to transport than wooden posts.

      Rebar posts can be supported in the ground or by buckets filled with sand or concrete to support temporary outdoors canopies. Place posts approximately 8 feet apart and connect them with horizontal bars to add support. Cover the top with a canvas, and add optional netting around the sides to keep flying pests away from the gathering.