How to Choose the Correct Bicycle With Pain in Hip
Things You'll Need
- Road bike
- Mountain bike
- Cruiser bike
- Recumbent bike
Instructions
-
-
1
Check the stand-over height of the bike by swinging your leg over the bike's top tube. If your crotch makes contact with the top tube before your feet are flat on the floor, the bike is too tall.
-
2
Check the size of the bike by examining the seat tube underneath the seat; this is where the bike's size is marked in centimeters. Choose a smaller bike and check the stand-over height. When the top tube is within 1 inch of your crotch the bike's size is correct.
-
3
Adjust the seat height. Seat height is correct when there is approximately a 5-degree bend in your knee when you are sitting on the seat, with your leg at the bottom of the pedal stroke.
-
4
Take the bike for a short ride. If there is pain when you lean forward, the cockpit angle might be too steep or too short. The cockpit is the distance between the seat and handlebar grips.
-
5
Test a different style of bike with a taller stem (the part that holds the handlebars on the bike.) Try either a mountain bike, or a cruiser type bike. Adjust the seat height first then test ride. If there is no pain when you are bent forward take the bike for a test ride.
-
6
If your hip hurts at the bottom of the pedal stroke, lower the seat in 1/2-inch increments until the pain is alleviated. If the pain does not go away after you have lowered the seat 2 inches or less, abandon the road, mountain and cruiser style bikes and test a recumbent style bike.
-
1
sports