How to Make a Breakable WWE Table

“Tables, tables, tables!” is a frequent chant that can be heard at a live WWE event. To help prevent full damage, WWE tables are specially assembled to break and support falls from WWE superstars. You can easily make a table like this for use in a WWE match.

Things You'll Need

  • Plywood
  • Screws
  • Pipes
  • Pre-made table
  • Wood glue
Show More

Instructions

  1. Full Impact Table

    • 1

      Purchase a large piece of plywood.

    • 2

      Spraypaint the wood with a dark brown color to represent the color of most WWE tables.

    • 3

      Flip the table upside down. Screw in four wooden legs that should also be made out of plywood. Aluminum pipes would work also.

    • 4

      Stand the table up to make sure it is sturdy enough to stand on its own.

    • 5

      Use the table in the match. To make sure the table breaks correctly, have the person collide with the table in its exact center.

    Easy Breakaway Table

    • 6

      Find a premade plywood wooden table.

    • 7

      Smash or cut through the center of the table without breaking off or shattering too many pieces.

    • 8

      Apply small areas of wood glue to the crack in the wood and put the table back together.

    • 9

      Slam a wrestler through the center of the table. It should break along the same line and the table can even be reused in future matches if not too damaged.

    • 10

      Double-check the crack in the table to make sure that there are not any loose sharp pieces if you wish to reuse the table again.