How to Put a Sticker Kit on a Dirt Bike

Dirt bike sticker kits can give your tired set of wheels a little bling. They come in all sorts of designs and are specifically manufactured to fit your bike's plastic. If you're ready to give your dirt bike an extreme makeover, follow these tips.

Things You'll Need

  • Blow dryer
  • Single-edged razor blade
  • Glass cleaner
  • Paper towels
  • Needle
  • Squeegee
Show More

Instructions

    • 1

      Remove any stickers that are currently on your dirt bike. Use a blow dryer to heat the old stickers and make them easier to remove. Scrape off any remainders carefully with a single-edged razor blade.

    • 2

      Clean all plastic shrouds on the dirt bike with glass cleaner. Wipe completely dry with paper towels.

    • 3

      Warm your dirt bike plastic using the blow dryer. Remove the backing from behind one corner of the first sticker you are applying.

    • 4

      Place the corner of the sticker down on the plastic shroud and, using your hand, carefully smooth the sticker while slowly peeling away the sticker's backing.

    • 5

      Repeat Steps 3 and 4 for each sticker from the kit until all stickers are in place on the dirt bike.

    • 6

      Puncture any air bubbles that you see in the stickers with a needle. Gently press the sticker flat with your thumb.

    • 7

      Run a squeegee across each sticker to smooth it out.