Instructions for Using Lacrosse Technology on a Clock

La Crosse Technology clocks use regularly updated time signals to provide accurate and convenient timekeeping. Learning to program and use a La Crosse Technology clock is simple for even the most electronically challenged users.

  1. Battery Information

    • La Crosse Technology clocks are powered by standard AA batteries. For best results, the manufacturer recommends using alkaline batteries, rather than rechargeable. To install the batteries, remove the battery cover, insert the batteries and replace the cover.

    Set Up

    • After you install the batteries, leave the La Crosse Technology clock undisturbed for 15 minutes while the alarm searches for the time signal from the National Institute of Standards and Technology in Fort Collins, Colo. When the clock has received the signal, the time and date will set automatically. Your clock will receive regularly scheduled updates each day. If the updates are interrupted, you may occasionally have to set the time on your clock manually. To set the time manually, press the "Set" button and then use the "+" and "-" buttons to increase and decrease number values until the desired time is reached.

    Positioning

    • The position of your La Crosse Technology clock has an impact on how well the device will perform. Radio-controlled devices, as well as buildings made from materials like stucco, or metal and aluminum siding, can interfere with the reception of the atomic signal. For best results, position your clock away from such materials and near a window. Your clock has the best chance of receiving its daily updates if it faces west.

    Care and Maintenance

    • Proper care and maintenance will help keep your La Crosse Technology clock functioning at its best. This includes keeping your La Crosse Technology clock clean, out of extreme temperatures and away from excess moisture. If your clock needs to be cleaned, wipe it with a soft cloth that has been dampened in a solution of mild soap and water. If your clock gets wet, dry it thoroughly with a soft cloth.