Instructions for the Cannondale IQ118

The Cannondale IQ118 computer provides real-time information to the bicyclist that includes speed, distance traveled, ride time and actual time. The computer mounts to the bicycle at the handlebars on a mount and has a wireless sensor that goes onto the front fork of the bicycle frame. The use and care of the computer is broken into two parts: installation, and programming. The computer is powered by a single CR2032 3v lithium battery in the transmitter and display unit (supplied with the computer package.)

Instructions

  1. Installation

    • 1

      Thread two of the included black zip ties through the wireless sensor's backing. Place the sensor up against the upper third of the front fork, keeping it in the right hand side of the fork. Connect the zip ties to secure the sensor to the frame and clip off the excess plastic from the connected ties.

    • 2

      Screw the mounting bracket into the center of the bicycle handlebars. Wrap the clamps around the bar and tighten them down using a small screwdriver.

    • 3

      Pop the battery housing off the back of the display unit and make sure the battery is in place. Put the housing back on, then slide the display unit into the mounting bracket between the handlebars.

    Programming the Unit

    • 4

      Press "Function" once. Press "Set" to scroll through the five language options. Choose "English."

    • 5

      Press "Function" once more and choose between miles or kilometers.

    • 6

      Press "Set" twice to get to the wheel size screen. Select your wheel size on the menu ( the most common size for road bicycles is 700 cm and most common size for mountain bicycles is 26 inches.)

    • 7

      Press "Function" and scroll to the Odometer. Press set until the odometer reads zero.

    • 8

      Press "Function" and scroll to the watch function. Press "Set" to scroll to hours. Press the side buttons to go up to the desired hour. Press "Set" to scroll to minutes. Press the side buttons to program the minutes. Press "Set" once to lock the time.