How to Install Bumpers on an E-Z-GO Cart

The E-Z-Go golf cart is a staple among gated communities and golf courses. If you have been in a small accident with your E-Z-Go golf cart or the bumper has just started to wear, you can replace it. Replacing the bumper will give the golf cart a better look cosmetically and will also protect the underside of the cart. You don’t have to be an E-Z-Go technician to install a new bumper. You can do it yourself with little hassle.

Things You'll Need

  • Drill
  • 3/16 drill bit
  • Wrench
  • New bumper
Show More

Instructions

    • 1

      Park the E-Z-Go golf cart on level ground. Turn the key to the “Off” position on the solenoid and set the parking brake.

    • 2

      Use a 3/16-drill bit to drill into the pop rivets on the bumper.

    • 3

      Use a wrench to remove the bolts securing the bumper to the chassis. Remove the washers and the bumper plugs from the bumper.

    • 4

      Install your new bumper and then secure it with the bolts, washers and plugs.