How to Fix a Scratched Driver Head

Like anything else, golf drivers are highly susceptible to wear and tear and can begin to show tiny scratches on the top, or crown, of the head. These scratches may be caused by such things as dropping the club, for instance, or coming into contact with objects such as pebbles during the swing. Repairing the scratches is similar to repairing a scratch on a car. Though the actual work takes only a few minutes, periods between steps can be long;. So be sure to give yourself a couple of days to complete the job.

Things You'll Need

  • Soapy water
  • Wash cloth
  • Painter's tape
  • Driver head paint
  • Small paint brush with extremely fine bristles
  • Sandpaper
  • Car polish
  • Buffing cloth
Show More

Instructions

    • 1

      Clean the entire club head with soapy water and a wash cloth. The area around the scratches is the most important to clean, but it is a good idea to simply clean the entire head.

    • 2

      Put painter's tape around the scratch, leaving as little room as possible between the scratch and the edges of the tape.

    • 3

      Brush a single coat of paint over the scratch. It is important to brush in one direction in order to blend the color into the rest of the club head. If the scratch is deep, apply a second coat of paint once the first coat has dried.

    • 4

      Soak a small piece of sandpaper in cold water for at least 15 minutes once the paint has dried completely.

    • 5

      Remove the sandpaper from the water and use it to gently brush the newly painted area. Soaking the sandpaper will allow it to simply smooth the area rather than cause new scratches. Again, you should consistently brush the surface in the same direction.

    • 6

      Remove the painter's tape and wipe the club head down with a soft towel.

    • 7

      Allow the paint to cure for 1 to 2 days and then brush a thin layer of car polish over the scratch and buff it once it has dried.