How to Replace Velcro on Knee Locks for Goalie Pads

Goalie pads for hockey players have Velcro straps that lock together to keep the pads in place. However, over time, those Velcro straps wear out and no longer strap on properly. Some goalie pads allow you to remove and replace the straps, while other pads require that you cut the strap and then replace it. Regardless, you can find Velcro straps at local fabric or online stores for purchase.

Instructions

    • 1

      Remove the old Velcro strap. Unstrap the Velcro and remove the old strap. If necessary, cut the entire Velcro strap, leaving a half-inch of fabric left.

    • 2

      Replace the old Velcro strap. If necessary, sew the new Velcro strap onto the half-inch fabric left from the original Velcro.

    • 3

      Sew the Velcro using a straight stitch. Measure the length of the thread needed to sew the strap. Lay the needle flat on the Velcro and pinch a piece of the Velcro. Insert the needle into the pinched Velcro in a horizontal angle. Pinch another piece of the Velcro and insert the needle. Continue the process until you reach the end of the knot. For added strength, complete three straight stitch lines.