How to Make a Mini Soccer Goal
Things You'll Need
- Tape measure
- Wood
- String
- Netting
- Drain rods
- Old rags
- Saw
- Fork
Instructions
-
-
1
Measure out the length of the goals with a tape measure. Dig holes, with a fork, where the goalposts should be inserted. The holes should be six inches deep and six inches in diameter.
-
2
Build the goalposts from two pieces of wood, which should be six and a half feet in length at least. Any sturdy wood will suffice. Check that the wood is not too wide to fit into the holes dug earlier. Cut off the ends of the wood with a saw where necessary. Plant the wood in the holes. The posts don't need to be a tight fit, but they should be strong enough to resist impact from a ball or player. Add padding to the posts via tying old rags to them with string.
-
3
Use plumbers drain rods for the crossbar. These will connect together, and should be placed on top of the goalposts. The crossbar should then be tied to the goalposts with string. Don't be concerned if the pipes are too long. As long as they come to the minimum ten feet then they can be utilized.
-
4
Connect soft netting to the frame of the goal behind the goalposts and crossbar, by using string. The best netting for this purpose is garden netting, which is used in gardens to protect crops. Tie the netting to both goalposts separately, connecting with the crossbar, and also tie the netting to the center of the goal.
-
1
sports