How to Remove an End Cap on a Softball Bat

When using a metal softball bat, there is a cap on the top of the bat. When you remove the cap you can access the inside of the bat. This is helpful if you have a crack on the bat and want to see if it runs through the entire depth of the bat, or if you want to sand down the inside of the bat to reduce its weight. Whatever the reason is, you can remove the end cap from the softball bat with only a few household tools.

Things You'll Need

  • Softball bat
  • Flathead screwdriver
  • Hammer
Show More

Instructions

    • 1

      Place the softball bat on the ground.

    • 2

      Position a flathead screwdriver in the small gap between the main barrel of the bat and the bat cap.

    • 3

      Hammer down on the top of the screwdriver to force it into the gap.

    • 4

      Remove the screwdriver and repeat the hammering process around the bat cap until the cap is loose. Eventually you can pry off the cap with the screwdriver.