How to Put Together a Flick Trix

Flick Trix is a miniature model of a BMX bike that can fit in the palm of your hand. The innovative toy features all the working components of a full-size BMX bike. Perform freestyle tricks and maneuvers by controlling the bike with your fingers. Flick Trix recommends inserting your index finger through the center of the handlebars to maintain control of the bike. While the majority of the bike components are pre-assembled, you can make necessary adjustments with the miniature tool set provided by Flick Trix.

Things You'll Need

  • Flick Trix tools
Show More

Instructions

    • 1

      Align the Flick Trix handlebars over the stem of the frame. Tighten the handlebar screw with the miniature screwdriver. Slide the grips onto the handlebars.

    • 2

      Align the front wheel between the forward dropouts of the Flick Trix frame. Insert the miniature axle through the dropouts and wheel hub. Hold the axle bolt in place with the miniature wrench provided by Flick Trix.

    • 3

      Tighten a hex nut onto the opposing end of the axle with the mini-combo wrench. Stretch the elastic Flick Trix chain around the chain ring of the rear wheel. Align the wheel with the rear dropouts.

    • 4

      Hold the axle bolt in place while tightening a hex nut onto the opposing side of the axle. Insert the seat post into the miniature frame. Adjust the seat height before tightening the seat post screw.

    • 5

      Rotate the pedals of the Flick Trix to ensure you have installed the rear wheel correctly. Avoid over-tightening the screws, as this will cause the brakes to malfunction.