Gazelle Edge Assembly Instructions

The Gazelle Edge, made by Fitness Quest, is a compact, lightweight, in-home elliptical machine with both upper and lower body movement. You glide your feet back and forth on the suspended pedals while pushing and pulling the handles with your arms. The Edge has a small, 43-inch by 28-inch, footprint. It weighs only 40 lbs., but can support users up to 250 lbs. The Gazelle Edge does not have any hydraulic tension system and the frame is pre-assembled, so you only have to assemble the suspension cables.

Instructions

    • 1

      Push the rubber feet onto the ends of the front legs.

    • 2

      Use two bolts to connect the two crossbars that hold the front legs together.

    • 3

      Pull on the front and rear legs to open up the frame until it clicks in place. It should form an "x."

    • 4

      Attach the front portion of the foot platform to the rollers on the bottom of the swing arms. Repeat for the other foot platform.

    • 5

      Screw the suspension cable on the back of the foot platform. Repeat for the other foot platform.

    • 6

      Thread the cable through the cable holders on the back of the foot platform and bolt the other end of the cable to the top part of the front leg. Repeat on the other foot platform.