How to Fill a Kerosene Lamp

A kerosene lamp, also known as a parrafin lamp, uses kerosene as fuel to create a flame. It is often used by campers as a light source. A wick is inserted into the kerosene. When lit, the wick burns as long as there is fuel in the tank. If the fuel runs dry, add more kerosene to the lamp. Add fuel outdoors, away from flames and while the lantern is not lit.

Things You'll Need

  • Filter funnel
  • Kerosene
Show More

Instructions

    • 1

      Put the kerosene lamp on a flat surface.

    • 2

      Turn the fuel valve to the “Off” position.

    • 3

      Turn the “Pump Knob” in the direction indicated by the arrow to close it.

    • 4

      Remove the fuel cap.

    • 5

      Insert a filter funnel into the opening on the fuel tank.

    • 6

      Pour clean kerosene into the filter funnel. The filter removes any unwanted sediment from the kerosene before it reaches the fuel tank. Fill the tank to the indicated “Fill” line.

    • 7

      Remove the filter funnel and replace the fuel cap.