How to Transport a Canoe

Canoes are designed to glide smoothly through the water with minimum effort. Sometimes the biggest obstacle is getting it to the water in the first place. Here's how to make the transport to and from the water go almost as smoothly as the paddling.

Instructions

    • 1

      Find a helper. It's much easier for a novice to transport a canoe with another person than alone. Get instruction from an experienced canoeist before attempting a solo carry.

    • 2

      Empty the canoe. Make sure your canoe is free of water, gear and anything else that may be weighing it down. Transporting an empty canoe is much easier on you and the canoe.

    • 3

      Lift with your legs. No matter which carry you use, keep your body as upright as you can and bend your knees. You'll save your back that way.

    • 4

      Use the underhand carry for short distances. Stand on the opposite side of the canoe from your partner, on opposite ends of the canoe. You will each grab the gunwale with the hand nearest the boat, and lift at the same time. Communicate with each other while walking to help the other person avoid obstacles and to know when one of you needs to take a break.

    • 5

      Use the overhead carry for longer distances. Stand on the same side of the canoe as your partner, on opposite ends. Grab both gunwales of the seat nearest to you. Lift the canoe to thigh level and rest it against your thighs. Now lift the canoe up and over your heads in one continuous motion, then lower it onto your shoulders.