How to Use a Rappelling Line as a Safety Rope

Rappelling lines, or ropes, are typically static and have few tendencies to stretch when placed under a weight load. This type of rope makes for a perfect safety line because the safety line tends to be fixed in position and is often placed under heavy stress. Setting the safety line off a rappelling line is no different than setting a climbing rope on a fixed anchor.

Things You'll Need

  • 2-inch tubular webbing
  • Locking carabiners
  • Carabiners
  • Anti-slip tension device such as an ATC
  • 8.5mm to 12mm rappelling/static line rope
Show More

Instructions

    • 1

      Pick out your anchor point to fix the rappelling line. Your anchor can be two to three trees, rocks or even a singular rock or large tree.

    • 2

      Set the tubular webbing around the anchor point and close the wrap with a locking carabiner -- a metal D-clip designed to withstand falls and lock ropes into position. The average weight a carabiner can withstand during a fall is around 7 kilo-Newtons (kNs), or roughly 1,600 pounds. Turn the carabiner gate to the right to close it, then turn it back to the left by one-quarter of a turn.

    • 3

      Clip the ATC device -- a friction device used to stop falls from a fixed rope during belays or rappels -- into the carabiner and thread the rappelling line/safety through the ATC. Follow the ATC maker's instructions as they vary from model to model.

    • 4

      Thread the safety line through any fixed anchor points on the rock face or crag. Tie into the safety line through your chest or seat harness using a double figure-eight knot tied off to a locking carabiner at the harness attachment point.