How to Paint the Faded Plastic on a Kawasaki Jet Ski

Your Kawasaki Jet Ski is more than just a piece of recreational sporting equipment. It is an investment that you want to keep in good repair, both in functionality and appearance. If the paint has faded on the plastic parts of the Jet Ski, you can touch it up with a few simple steps thanks to the introduction of spray paints designed specifically to bond with plastic.

Things You'll Need

  • Ammonia-based cleaner
  • Fine-grit sandpaper
  • Lint-free cloth
  • Painter's tape
  • Spray paint for plastic
Show More

Instructions

    • 1

      Use an ammonia-based cleaner to remove any grease or debris from the surface, then sand the area with fine-grit sandpaper. Wipe away the dust with a lint-free cloth.

    • 2

      Cover any hardware or surfaces that will not be painted with the painter's tape. Also mark off areas that will be painted a different color, to ensure a sharp-edged, professional look to your job.

    • 3

      Paint the surface with spray paint designed for use on plastic, such as Krylon Fusion for Plastic or Rust-Oleum Hammered Paint for Plastic. Read the instructions on the can carefully and follow the proper painting procedure as outlined.

    • 4

      Follow the paint manufacturer's instructions for allowing the paint to dry completely. The item may be dry to the touch before it should be handled, and the directions may specify a curing time of up to 7 days before the item is fully chip-resistant.