How to Turn on the Jacuzzi for the Intellitouch

Using an IntelliTouch system to turn on a Jacuzzi heated whirlpool tub allows for precise configuration of your tub with a few touches of a button. Professional installers typically configure the IntelliTouch system, a digital control system made by Pentair, according to the user's specific needs. Once programmed, the Jacuzzi can be controlled by pushing a few buttons. The IntelliTouch system can be used through a control on the Jacuzzi or a remote control panel.

Instructions

    • 1

      Press the designated button on the iS4, IntelliTouch's four-function remote control, or iS10, a 10-function remote control, to turn on the power at the side of the Jacuzzi spa. The installer will label the buttons according to their function.

    • 2

      Press the designated button on the iS4 or iS10 controller to turn on the pump.

    • 3

      Press the "Heater" button on the Main Outdoor Control Panel to activate the spa heater. This button has a small flame graphic.

    • 4

      Press the "Filter Pump" button on the Main Outdoor Control Panel to activate the spa filter pump. This button has a letter "F" to indicate its function.

    • 5

      Press the "Valves" button on the Main Outdoor Control Panel to turn on the spa valves. This button is designated by the letter "V."