How to Adjust the Pull on a PSE Dakota Compound Bow

Compound bows give archers the capability to adjust the draw weight of their bow within the bow's range, typically 10 pounds. A major consideration in archery is arrow speed. Arrow speed is affected by a bow's draw weight and draw length. On many bows, draw length is set and cannot be adjusted, but draw weight can be increased or decreased, to meet the preference of the individual archer. Draw weight is the peak amount of weight needed to pull the bowstring back to a firing position. Adjusting the draw weight of a compound bow can be done basic tools.

Things You'll Need

  • Allen wrenches
  • Pull scale
Show More

Instructions

    • 1

      Determine if you want to increase or decrease your bow's draw weight. Draw the bowstring back and test the draw weight.

    • 2

      Turn the limb bolts using the Allen wrenches. The limb bolts are the bolts that attach the bow limbs to the riser.

    • 3

      Adjust the draw weight. To increase the draw weight, turn the limb bolts clockwise. To decrease draw weight, turn the limb bolts counterclockwise.

    • 4

      Count the number of turns on the limb bolts. Both limbs must be adjusted equally for the bow to operate correctly, and the limb bolts should not be turned more than four rotations in either direction from their stock position.

    • 5

      Measure the draw weight using a scale. Hook the center of the bowstring to the scale and begin pulling the bow down. Keep your hands on the edges of the riser, not the limbs, as the limbs are a moving part. Pull the bow until you reach the peak draw weight. Adjust the bow until you achieve the desired draw weight.