Displaying Baseball Cards on a Wall

A baseball card display case should protect the cards from damage while being sturdy enough to hang on the wall. Commercial display cases may come with slots for the cards. Some display cases are small enough to show just one card, while others are set up to show multiple cards. The display is attached to the wall in the same manner regardless of its size.

Things You'll Need

  • Hanging nails
  • Hammer
Show More

Instructions

    • 1

      Open the back of the display case. Many have one or two latches on each side of the case. Turn the latches so they aren't covering the back.

    • 2

      Place the front glass portion of the display case down and assemble the baseball cards in the order that you want. Put the back into the frame, pressing the glass down close enough so the cards don't move, and then secure the latches.

    • 3

      Hammer two picture hanging nails into the wall at an even level. Depending on the size of the display case, you may only need one nail. Space multiple nails apart so there is at least 3 inches from the edge of each side of the frame.

    • 4

      Place the wire on the back of the display case onto the hanging nail's hook. Slide the display case over until it is level.