How to Make a Football Goal Post
Things You'll Need
- 6 pieces of 1 1/2-inch PVC piping, 10 feet long
- 4 PVC T-connections
- 2 PVC elbows
- Hacksaw
- Sandpaper
- PVC glue
Instructions
-
-
1
Prepare your materials. For a medium-sized goal post, you will need approximately six 10-foot pieces of 1½-inch PVC piping, four T- connections and two elbows.
-
2
Cut the PVC piping into 2-, 4-, 6- and 8-foot pieces with a hacksaw. Lightly sand the edges of the PVC piping with fine-grit sandpaper to make them smooth.
-
3
Assemble all the pieces into the shape of the goal post. Connect the 2-foot piece to the 8-foot piece with a T connector to create one side of the base. Repeat to make the other side of the base. Join the two sides with a 10-foot piece to finish the base. For the side of the upright, connect the 4-foot pipe with a 6-foot pipe, again using a T-connector. Repeat for the other side of the upright as well. Finally, connect the two uprights with a 10-foot crossbar. You can set the height of the crossbar as you wish; the regulation height is 10 feet.
-
4
Check to make sure everything fits and that the goal post can stand firmly and securely on the ground. If some of the PVC elements are problematic, use a hacksaw and sandpaper to make them fit before continuing.
-
5
Attach all of the parts to one another by gluing them with PVC glue. Make sure to apply the glue to all the joints and all the ends of piping. Note that PVC glue fuses the two pieces of plastic together very quickly, so you'll have to work quickly but carefully.
-
1
sports