How to Use Crow Magnum Pellets
Things You'll Need
- Pellet pistol
- Crow Magnum pellets
- Target
Instructions
-
-
1
Hold your pellet pistol in your left hand with the barrel facing left. Press and release the slide latch on the rear of the pistol grip. The top slide will move backward about 1/4 inch.
-
2
Hold the pistol by the grip in your left hand. Grasp the rear of the slide and pull it back until it clicks.
-
3
Grasp the pistol in your left hand with the trigger in your palm and your thumb wrapped around the pistol top above the trigger. Push the slide forward with the open palm of your right hand.
-
4
Press the small, round safety button on the left side of the pistol grip behind the trigger.
-
5
Press the loading button on the front of the pistol underneath the barrel. The loading port of the barrel lifts up when you press the button.
-
6
Place a pellet in the lower, round port of the barrel. Press the pellet into the port so the bottom of the pellet clears the barrel seal. Press the barrel down to seal the barrel section.
-
7
Press the safety button on the right side of the grip near the trigger. This sets the pistol to a firing position.
-
8
Aim at a target and squeeze the trigger to fire. Repeat these instructions to fire another Crow Mangum pellet at your target.
-
1
sports