How to Take Apart Airsoft Pool

The Airsoft pool is a large inflatable swimming pool manufactured by Intex Recreation. This large pool mounts at ground level and comes equipped with its own external pump and filter. Because the pool takes up a lot of room, owners tend to disassemble and stow the pool away during cold months. No special tools are needed to disassemble the Airsoft pool. It will take an hour to disassemble and prepare the pool for winter storage.

Things You'll Need

  • Pliers
Show More

Instructions

    • 1

      Unplug the pool's pump from the outdoor electrical socket.

    • 2

      Remove the pump filter hoses from the side of the pool. Use pliers to loosen and remove them if necessary.

    • 3

      Unscrew and remove the four air covers that are mounted on the pool and situated around the circumference. Allow all the air to drain out.

    • 4

      Screw the air caps back on once the pool is completely deflated.

    • 5

      Hang the deflated pool over a bench or picnic table and allow it to dry for 24 hours before folding and storing it.