How to Tow a Waterskier

Towing a waterskier behind a boat can be challenging, especially for novice drivers. It can be especially challenging on busy lakes, rivers and oceans, where one must constantly be watching for other boats, jet skis and swimmers. Practicing safe boat driving with a qualified spotter will ensure optimal safety for the waterskier.

Instructions

    • 1

      Attach up to a 100-foot tow rope to the boat via a ski ring or center boom.

    • 2

      Toss the handle of the water ski rope to the waterskier in the water. Regulation waterski ropes are made of polypropylene. Higher-end tow ropes have foam-covered handles and float easily on top of the water. Cheaper ropes may sink and make it difficult for the skier to locate the handle in the water.

    • 3

      Start the boat engine and engage the throttle forward until the rope is nearly tight. Make sure the skier is lined up directly behind the boat.

    • 4

      Listen for the skier to yell, "Hit it!" and engage the throttle forward until there is enough speed and power to pull the skier out of the water. Skiing speeds range from 18 mph to 30 mph depending on the age of the skier and skill ability.

    • 5

      Maintain a speed that is comfortable to the skier. The spotter or observer will notify the driver of any hand signals given by the skier to adjust speed. Always make sure that the path ahead is clear of boats, jet skis or swimmers.

    • 6

      Steer the boat in a counter-clockwise direction when maneuvering around a lake. Keep the skier away from the shoreline, piers and other objects.

    • 7

      Circle the boat in a counter-clockwise direction to swing around and pick up a skier. Put the engine in neutral when gliding close enough and turn the engine off entirely when the skier is ready to board the boat.