How to Put on the Daisy Outdoor Products Electronic Point Sight

The Daisy electronic point sight is an aid designed to help shooters more quickly acquire a target downrange. The point sight is attached to the receiver of a rifle, shotgun or handgun by means of a dovetail mount. Featuring two grooves, a dovetail mount is designed to accept the mounting base of the Daisy electronic point sight. Attaching the mounting base to the dovetail requires a basic adjustment of the mount so it and the accessory are held securely in place.

Things You'll Need

  • Rag
  • Soft-bristle brush
  • Screwdriver
Show More

Instructions

    • 1

      Unload the Daisy air rifle. Point the muzzle of the rifle down and in a safe direction while working.

    • 2

      Wipe the dovetail mount grooves on top of the receiver with a rag to remove any debris. Use a soft-bristle brush, if necessary, to help remove any debris.

    • 3

      Loosen the two adjustment screws on the side of the Daisy electronic point sight mounting base. Use a screwdriver to help turn the screws if necessary.

    • 4

      Slide the point sight onto the dovetail mounting grooves on the air gun receiver. Raise the air gun and look through the sight. Move the sight forward or back, as necessary, until it is adjusted for your personal preference.

    • 5

      Turn the adjustment screws on the side of the mounting base clockwise to tighten it. Use a screwdriver to completely tighten and secure the mounting base to the dovetail grooves. Do not overtighten the mount.