Directions to Put a Tech Deck Skateboard Together

A Tech Deck is a 96mm skateboard that is made to be ridden with your middle and index fingers. Made out of plastic, these mini boards have the same graphics, trucks, wheels and bearings as a real skateboard. Tech Decks come fully assembled when purchased. However, you can change the wheel of a tech deck to graphic wheels. Personalizing and riding your Tech Deck is a great way to skateboard inside when you can't go outside.

  1. Placement

    • Turn the deck of the skateboard over so that the graphic is facing up. Be sure to place the deck on a level surface.

    Removal of Wheels

    • Hold the tool and put the ratchet around the nut inside the wheel. Turn the tool counter clockwise until the nut is removed.

    Replace the Wheels

    • Remove all four wheels on the skateboard and replace with new ones. Make sure that the wheel well is facing outwards.

    Reassemble

    • Place the nut back onto the truck of the Tech Deck. Attach the ratchet end of the tool over the nut and turn clockwise until you feel resistance.