How to Load the D95 Airsoft Gun

For the Airsoft enthusiast, having the luxury of a fully-automatic electric rifle is one that pays off on the playing field. The Well D95 Electric Airsoft Rifle is a very popular gun with competitive capabilities.

Things You'll Need

  • Well D95
  • Airsoft BBs
Show More

Instructions

    • 1

      Remove the clip. The clip of the Well D95 Electric Airsoft Rifle is just ahead of the trigger guard and removes by pressing the release clasp and pulling downward. The clip will pull free without much resistance.

    • 2

      Open the clip. On the front side of the clip, there is a small door near the top. It opens by pulling back from the top, revealing a hole where the BBs can be loaded. On the backside of the clip, there is a spring-loaded lever, which helps feed the BBs upward and into the firing mechanism. Pull that down and let it snap into place, locking at the bottom of the clip.

    • 3

      Insert BBs. The Airsoft BBs should be poured into the opening you revealed at the top of the clip. Fill the clip and close the opening. Slide the clip back into place on the underside of the D95 and push it into place until it locks.

    • 4

      Turn off the safety. The safety is located on the left side of the Well D95. There is a selector tab that allows the user to select the safety, a semi-automatic selection and a fully-automatic selector. Set the tab to your preferred firing style and lift the rifle to your shoulder, pressing the stock in and looking through the open sights or, if installed, the scope.

    • 5

      Put a round in the chamber. On the top left side of the Well D95 is the loading mechanism to prepare the first shot. All subsequent shots will automatically be fed into the chamber. To load the electric rifle for the first shot, grasp the bolt and pull it back until it clicks. It will feed the BB into the chamber and ready the gun to fire. Pull the trigger and fire your first shot.