How to Change the Draw Length on a Hoyt Katera

In 2008 Hoyt introduced the Hoyt Katera compound bow and advertised that this new premiere bow had an IBO speed of 330 fps, which made it the fastest bow ever produced by Hoyt at the time. With a new Z3 Cam and 1/2 System, the Katera provides a smooth pull and fast draw. Draw length is adjustable from 24 to 30 inches and can be changed by Hoyt Katera owners to fit the bow to their specific draw length.

Things You'll Need

  • Allen key
Show More

Instructions

    • 1

      Loosen the fastening screw on the top cam and remove the draw length screw using an Allen key.

    • 2

      Turn the inner-cam toward the (+) to make the draw length longer.

    • 3

      Shorten the draw length by turning the inner-cam toward the (-).

    • 4

      Lengthen or shorten draw length one lettered position for every 1/2 inch of adjustment needed.

    • 5

      Re-insert the draw length screw and tighten. Then, retighten the fastening screw.

    • 6

      Unscrew the draw length screw on the bottom cam using the Allen key.

    • 7

      Move the module on the bottom cam to the same lettered position as the top cam.

    • 8

      Reinsert and tighten the draw length screw on the bottom cam.